FUCK THE ATF
FUCK THE NFA
FUCK THE GCA
Text
What? Why? How? For Pistol Suppressors
A pistol suppressor, often commonly referred to as a silencer, is a cylindrical device attached to the threaded muzzle of a handgun to reduce the sound and visible signature produced when a round is fired. Despite the popular term “silencer,” suppressors do not make a firearm silent. Instead, they significantly reduce the intensity of the muzzle blast by slowing and cooling the rapidly expanding gases that exit the barrel behind the bullet. When a cartridge is fired, high-pressure gases propel the projectile forward. As the bullet leaves the barrel, those gases escape abruptly into the open air, creating the sharp cracking sound associated with gunfire. A suppressor contains a series of internal expansion chambers and baffles that capture and redirect these gases, allowing them to expand more gradually before exiting the device. This process can reduce the sound signature by approximately 20 to 35 decibels, depending on caliber, ammunition type, and suppressor design.
In terms of dimensions, most pistol suppressors designed for common calibers such as 9mm measure between 6 and 8.5 inches in length and typically have a diameter ranging from 1.25 to 1.5 inches. Weight varies based on materials and internal construction, but many modern handgun suppressors weigh between 8 and 13 ounces. Compact models prioritize maneuverability and reduced overall firearm length, while longer models provide greater internal volume, often resulting in improved sound reduction. Some contemporary designs are modular, allowing users to configure the suppressor in a full-length or shortened configuration depending on their needs. This modularity provides flexibility in balancing sound performance with size and weight.
The materials used in pistol suppressors are critical to their performance, longevity, and cost. Common materials include aluminum, stainless steel, titanium, and high-temperature superalloys such as Inconel. Aluminum is lightweight and relatively affordable, making it popular in suppressors intended for lower-pressure handgun cartridges. However, aluminum components may wear more quickly under sustained high heat or heavy firing schedules. Stainless steel offers increased durability and corrosion resistance, making it suitable for higher round counts and more demanding use. Titanium provides an excellent strength-to-weight ratio, allowing manufacturers to produce strong yet lightweight suppressors, though it tends to increase cost. Inconel and similar nickel-based superalloys are extremely heat resistant and durable, often used in components that experience the greatest thermal and pressure stress. The selection of materials directly influences how well a suppressor withstands repeated firing and harsh environmental conditions.
Versatility is another defining characteristic of many modern pistol suppressors. Some models are caliber-specific, engineered to optimize sound reduction and performance for a particular cartridge. Others are multi-caliber rated, meaning they can safely accommodate a range of handgun calibers within specified pressure limits. This versatility allows owners to use a single suppressor across multiple firearms, provided the mounting system and barrel threading are compatible. Mounting systems themselves vary. Direct-thread mounts are simple and secure, threading directly onto the barrel. Some designs incorporate booster assemblies, also known as Nielsen devices, to ensure reliable cycling on recoil-operated semi-automatic pistols. Quick-detach mounting systems are more common in rifle suppressors but are sometimes available for handgun platforms as well.
Durability depends not only on materials but also on design and maintenance. Over time, suppressors accumulate carbon, lead, and copper fouling from repeated firing. Some pistol suppressors are user-serviceable, meaning they can be disassembled for cleaning. Others are sealed units that rely on specific cleaning methods to maintain performance. With proper care and reasonable firing schedules, a well-constructed suppressor can last for tens of thousands of rounds. Heat management is especially important, as rapid or sustained firing can generate significant internal temperatures that stress materials and accelerate wear.
From a value perspective, pistol suppressors represent a blend of precision machining, advanced materials, and regulatory compliance costs. Prices vary widely depending on brand, materials, modular features, and caliber ratings. While entry-level models may be more affordable, premium suppressors constructed from titanium or superalloys command higher prices due to enhanced durability and performance. For many users, the value of a suppressor lies in reduced noise exposure, improved shooting comfort, and decreased muzzle flash. However, prospective owners must always consider applicable laws and regulations in their jurisdiction, as suppressor ownership is regulated in many regions.
Check out Brownells (Code BOP10) for all your NFA needs: https://alnk.to/2QzZuFo
Text
What? Why? How? For Rifle Suppressors
A rifle suppressor, often referred to in conversation as a “silencer,” is a firearm accessory designed to reduce the sound and visible muzzle flash produced when a rifle is fired. The primary function of a suppressor is to slow and cool the expanding propellant gases that exit the barrel behind the bullet, which in turn lowers the peak sound pressure level that reaches the shooter and bystanders. It is important to understand that a suppressor does not make a rifle truly silent; rather, it diminishes noise to safer and more comfortable levels. Suppressors are commonly used in hunting, recreational shooting, and some professional applications to improve hearing safety and reduce recoil.
Suppressors come in many dimensions, with length, diameter, and overall weight varying by design, caliber compatibility, and intended use. Typical rifle suppressors range from about six inches to over thirteen inches in length, and outside diameters generally fall between one inch and two inches. Smaller, lightweight models are designed for close-quarters or compact carbines and may weigh under ten ounces, while larger designs meant for high-pressure rifle rounds can weigh over twenty ounces. The internal volume and baffle configuration—the series of chambers inside the suppressor that slow and cool gas—are key factors in both effectiveness and size. A longer suppressor with greater internal volume generally offers more sound reduction than a shorter one, but this also increases weight and overall length.
The versatility of modern rifle suppressors is notable. Many units are engineered with modularity in mind, allowing users to remove or add sections to adjust length and performance. This modular design enables shooters to tailor a suppressor’s size and weight to specific applications, whether it’s a lightweight setup for mountain hunts or a more substantial configuration for long-range precision shooting. Additionally, many suppressors are designed to be compatible with a range of calibers, though matching the suppressor to the specific rifle and ammunition type is crucial for safety and performance. Adaptable mounting systems are common, including direct thread attachment, quick-detach mechanisms, and muzzle device interfaces that allow rapid installation and removal without tools.
Material selection plays a significant role in suppressor construction, durability, and cost. High-strength steels such as 17-4 stainless or Inconel are frequently used for the internal baffles and tubes because they endure the extreme heat and pressure generated by rifle cartridges. These metals resist erosion and deformation even under rapid or sustained fire. Titanium and aluminum alloys are also employed, particularly in components where weight savings are important; titanium offers an excellent strength-to-weight ratio and corrosion resistance, while aluminum is lighter but typically reserved for lower-pressure applications. In some premium designs, heat-resistant coatings or surface treatments are applied to further enhance longevity and reduce reflective glare. The choice of materials affects not only performance and longevity but also cost.
Durability is a critical consideration for rifle suppressors, and it is closely tied to materials and construction quality. A well-built suppressor should withstand repeated firing of appropriate calibers without baffle strike (when the bullet contacts an internal surface) or significant erosion of internal components. Hardened steels and superalloys provide longevity in high-pressure environments like those generated by magnum rifle cartridges, while corrosion-resistant finishes help protect against the elements. Suppressors subjected to frequent and intense use should be periodically inspected and, where applicable, disassembled and cleaned to prevent buildup of carbon and lead deposits that can affect performance. The thread interfaces and mounting surfaces also require careful engineering to preserve alignment and prevent loosening during use.
Value in a suppressor is influenced by performance, durability, weight, and ease of maintenance. Less expensive units might offer acceptable sound reduction for casual shooters, but they may sacrifice longevity or versatility. Mid-range suppressors often strike a balance between cost and performance and include features like modularity and corrosion-resistant materials. High-end suppressors tend to excel in sound reduction, material quality, and innovative designs, but they also command premium prices. For many users, long-term value is found in choosing a suppressor that matches their typical use case—for example, selecting a model rated for the specific calibers they most frequently shoot rather than opting for the largest, most expensive unit available.
Overall, rifle suppressors are engineered accessories that reduce sound and muzzle flash, enhance shooting comfort, and protect hearing when used appropriately. Their design involves careful consideration of dimensions, material science, and intended application to balance performance, weight, and cost.
Check out Brownells (Code BOP10) for all your NFA needs: https://alnk.to/2QzZuFo
Text
Let’s talk SBR’s
Owning a short-barreled rifle in the United States involves more legal responsibility than owning a standard rifle because these firearms are regulated under the National Firearms Act. A short-barreled rifle, commonly called an SBR, is defined as a rifle with a barrel length of less than 16 inches or an overall length of less than 26 inches when the stock is fully extended. Barrel length is measured from the closed bolt or breech face to the end of the muzzle, and overall length is measured in a straight line from the muzzle to the rear of the stock. Any rifle that meets either of these measurements, including one modified from an existing rifle, is classified as an SBR and subject to federal regulation.
To legally own an SBR, a civilian must comply with federal registration requirements administered by the Bureau of Alcohol, Tobacco, Firearms and Explosives. The firearm must be registered in the National Firearms Registration and Transfer Record before possession or manufacture. If an individual intends to build or convert a firearm into an SBR, they must submit an ATF Form 1. If purchasing an already manufactured SBR from a licensed dealer, an ATF Form 4 is required. Both processes involve a detailed background check, submission of fingerprints and photographs and notification of the local chief law enforcement officer. Approval can take several months, and the firearm cannot legally be assembled or transferred until approval is granted. In addition to federal law, state and local regulations must be followed, as some states prohibit SBR ownership entirely while others impose additional restrictions.
From a physical standpoint, short-barreled rifles are valued for their compact dimensions. With barrel lengths typically ranging from around 7.5 inches to just under 16 inches, SBRs are significantly shorter than standard rifles. Their reduced overall length improves maneuverability in confined spaces, such as indoors or inside vehicles, and allows for easier storage and transport. Despite their smaller size, SBRs maintain the ergonomics and control of a shoulder-fired rifle, which distinguishes them from pistols or other compact firearms.
Versatility is one of the primary reasons enthusiasts pursue SBR ownership. These rifles can be chambered in a wide variety of calibers, including intermediate rifle cartridges and specialized rounds designed for shorter barrels. Platforms such as the AR-15 allow for modular customization, enabling owners to change handguards, optics, stocks, and accessories to suit different purposes. SBRs can be configured for home defense, training, recreational shooting, or professional use where compactness is essential. Their design also makes them compatible with suppressors, which can further tailor performance characteristics.
In terms of durability, short-barreled rifles are generally built to the same standards as full-length rifles. Receivers are commonly manufactured from high-strength aluminum alloys, while barrels, bolts, and other critical components are made from chromoly steel or stainless steel to handle heat and pressure. Stocks and furniture are often constructed from reinforced polymer or metal, designed to withstand hard use. With proper maintenance, an SBR can provide long service life and reliable performance comparable to that of a traditional rifle.
The value of owning a short-barreled rifle depends on the individual owner’s priorities. The added wait for the tax stamp, registration process, and potential legal complexity may outweigh the benefits for some. For others, the combination of compact size, adaptability, and rifle-level performance makes the investment worthwhile. SBRs occupy a unique place in firearm ownership, offering capabilities that standard rifles cannot easily replicate, provided the owner is willing to meet the legal requirements.
For all your NFA needs checkout Brownells. Find here: https://alnk.to/btqUF7u
Text
Kes Apandi Tutup Jenayah Najib Diklasifikasi NFA Sejak 2022
Kementerian Dalam Negeri mengesahkan kes dakwaan bekas Peguam Negara, Tan Sri Mohamed Apandi Ali, menutup jenayah bekas Perdana Menteri Datuk Seri Najib Razak telah diklasifikasikan sebagai tiada tindakan lanjut (NFA). Keputusan itu dibuat Pejabat Peguam Negara pada 5 Oktober 2022 selepas kertas siasatan Polis Diraja Malaysia (PDRM) dirujuk kepada mereka.
Kes Apandi Tutup
Siasatan bermula…
Text
AGC Issues No Further Action on Zahid Hamidi’s 47 Corruption Charges
PUTRAJAYA: The Attorney General’s Chambers (AGC) has decided on No Further Action (NFA) for all 47 charges of criminal breach of trust, corruption and money laundering against Deputy Prime Minister Datuk Seri Dr Ahmad Zahid Hamidi. The decision, based on professional and legal considerations, terminates the case involving Yayasan Akalbudi funds, citing insufficient evidence to continue…
AGC Issues No Further Action on Zahid Hamidi’s 47 Corruption Charges
Text
(Internal thoughts in an airport)
Hmmmmm … is this the right gate?
*spots a grumpy-looking old man in a three-quarter zip with SUPER BOWL CHAMPIONS and the Patriots logo embroidered over his heart*
Yep. This is the right gate.
Text
TODAY IN NFA DEVELOPMENT:
we got W.G. and Hitmarker YAOI
as well as an update on W.G.’s model :-)
(both by Ben)
Text
Does running a suppressor have health benefits?
Using a suppressor on a firearm provides a range of health benefits that extend beyond simple noise reduction. A suppressor functions by slowing and cooling the escaping gases from a fired round, which has the effect of lowering the decibel level of the shot. One of the most significant health benefits of this is the protection it offers to hearing. Firearms are extremely loud, with many rifles and handguns producing noise levels well above 160 decibels. This is far higher than the threshold for immediate and permanent hearing damage. A suppressor can reduce that sound by 20 to 35 decibels, depending on the caliber and design, bringing many firearms into a safer range. While the sound may still be loud, the reduction greatly decreases the risk of irreversible hearing loss.
The benefit of hearing protection is particularly important in preventing long-term conditions such as tinnitus, which is the constant ringing or buzzing in the ears caused by damage to the auditory system. Shooters who are exposed repeatedly to unsuppressed gunfire often develop this condition, which has no permanent cure. By lowering sound pressure levels, suppressors significantly reduce the likelihood of this issue developing. Additionally, while ear protection such as earmuffs or plugs are helpful, they are not perfect, and suppressors provide a further layer of defense that complements other protective measures.
Another important health benefit is the reduction of stress and physical strain associated with loud noise exposure. Sudden and extremely loud noises can trigger the body’s startle response, increasing heart rate and blood pressure. This can place unnecessary strain on the cardiovascular system, especially for individuals who shoot regularly. Suppressors lessen the shock of each gunshot, making shooting more comfortable for the body. By lowering noise intensity, they reduce the likelihood of stress-related side effects during prolonged training sessions or hunts.
Suppressors also improve communication among shooters. In unsuppressed environments, shooters often need to shout to communicate over gunfire, which can strain the voice and lead to miscommunication. In contrast, suppressed gunfire is much easier to talk over, reducing the risk of vocal strain and the stress of constant shouting. This also leads to improved safety, since clear communication prevents mistakes and accidents.
Another less-discussed health benefit is the reduction of recoil impulse and muzzle blast. While suppressors do not eliminate recoil, they redirect gases in a way that softens the felt kick of the firearm. Over time, reduced recoil lessens physical strain on the shoulders, wrists, and hands. This is particularly important for shooters with joint issues, past injuries, or smaller frames who might otherwise be at risk of strain or repetitive motion injuries. The reduction of muzzle blast also minimizes the amount of hot gas and debris hitting the shooter’s face, which can irritate eyes and respiratory systems.
Suppressors also help preserve mental well-being in environments where noise exposure is constant. Loud gunfire can create fatigue, headaches, and irritability over time, especially in indoor ranges where sound reverberates off walls. By making the shooting experience quieter and more controlled, suppressors reduce these negative effects, leading to a more enjoyable and sustainable experience for the shooter. Mental fatigue from constant high noise levels can also decrease focus, which in turn can compromise both health and safety.
In hunting situations, suppressors improve the overall health experience by making the environment more natural. Loud, echoing gunshots can cause stress not only to the shooter but also to nearby wildlife and hunting companions. A quieter report is less disruptive and allows the shooter to remain calmer in the field. This calmer environment can reduce adrenaline spikes that may otherwise take a toll on the body after extended periods.
Overall, suppressors provide multiple health benefits that go far beyond convenience. They protect hearing, reduce the risk of tinnitus, limit cardiovascular stress, decrease physical strain from recoil, improve communication, and reduce fatigue associated with loud environments. While they do not eliminate all risks from shooting, they significantly improve both short-term comfort and long-term health outcomes for firearm users.
Brownells carries a ton of suppressors, be sure to use BOP10.
Text
New: Two-Thirds of Politicians’ Criminal Cases Marked ‘no further action’, Says Azalina
Two-thirds of criminal investigation papers involving politicians between 2020 and July this year have been classified as “no further action” (NFA), Minister in the Prime Minister’s Department (Law and Institutional Reform) Azalina Othman Said revealed. Citing Attorney-General’s Chambers (AGC) data, she said 41 out of 60 cases fell under NFA. However, she stressed that such cases could be…
New: Two-Thirds of Politicians’ Criminal Cases Marked 'no further action’, Says Azalina
Text
It’s complete bullshit that the flood of alibaba and amazon DIY suppressors got cut off before the NFA tax on suppressors got wiped out. Bring back $40 unregulated silencers on eBay! We could be living in a golden age!
I’m not bitter because I can’t hunt on some of my best friends’ land, which happens to be completely stacked with deer, because they have a dog who is incredibly scared of loud noises and my deer rifle is very decidedly a loud noise. (They have too many deer, to the point that the local fauna is facing problems! I can fix that problem!)
Text
Server: Are we celebrating anything this evening?
NFA: Oh, I celebrate her every day.
Server: Ok. That’s the best answer I’ve ever gotten to that question.
Text
Good Things
OPI Funny Bunny nail polish, which I just bought after deciding to jump on the white nail polish trend.
Spending a rainy Saturday snuggled up on the couch watching (European) football with NFA.
Teddy’s gentle, automatic tail wag whenever I pat him as he’s eating.
Having the weekend to myself.
Today’s walk in breezy, 62F weather.
Adelaide confiding in me about boys and friends.
The chocolate cake with passion fruit cream I shared with NFA on Valentine’s Day. (Passion fruit is always a yes.)
The small adorable smacking noise the rabbit makes when we give her blueberries.